how hard is the switch to MS2?

Reply Subscribe

Thread Tools

Search this Thread

05-19-2009, 11:19 PM

cardriverx

Elite Member

Thread Starter

iTrader: (12)

Join Date: Jan 2007

Location: Hermosa Beach, CA

Posts: 2,573

Total Cats: 12

how hard is the switch to MS2?

If I just dropped the chip into my MS1 V3, will I have to change any of the wiring mods? This settings seem somewhat similar, shouldn't be too bad to do that part. The larger tables and a actual PID closed loop boost control loop are so appealing...

05-20-2009, 03:49 AM

richyvrlimited

Elite Member

iTrader: (1)

Join Date: Jun 2006

Location: Warrington/Birmingham

Posts: 2,642

Total Cats: 42

All of the wiring mods need to be changed.

Firstly RTFM
MS2/Extra Manual Index

For the ignition you need to build the following circuits
MS2-Extra Miata 4g63 Manual

05-20-2009, 09:27 AM

Braineack

Boost Czar

iTrader: (62)

Join Date: May 2005

Location: Chantilly, VA

Posts: 79,490

Total Cats: 4,079

The spark output mods shouldn't need to be changed....it's the tach input that needs to be modified...then performing the regular mods/software updates to accept the ms-II daughterboard.

05-20-2009, 09:28 AM

richyvrlimited

Elite Member

iTrader: (1)

Join Date: Jun 2006

Location: Warrington/Birmingham

Posts: 2,642

Total Cats: 42

Quote:

Originally Posted by Braineack

The spark output mods shouldn't need to be changed....it's the tach input that needs to be modified...then performing the regular mods/software updates to accept the ms-II daughterboard.

The outputs come from different pins on the MSII though don't they?

05-20-2009, 09:37 AM

Braineack

Boost Czar

iTrader: (62)

Join Date: May 2005

Location: Chantilly, VA

Posts: 79,490

Total Cats: 4,079

its an output, it can go anywhere. They suggest IGN and spare4, don't see why you can't use IGN and IAC2A like normal....we don't need to use the stepper IAC control.