yada

iTrader: (1)

MSPNP On the center harness provided in the kit for wideband O2,knocksense, etc.... It tells you the numbers of the wires from left to right are 1-8 on top and 9-16 on bottom. My question is, Is that looking at the side of the connector that plugs into the MSPNP or looking at the side that the wires are on.

Loki047

iTrader: (6)

Im surprised they didnt but a reference in there. Like connector in face, or something like that

cjernigan

iTrader: (13)

I hate assuming things, i'm going to assume that is looking "into" the megasquirt connector though. So if you're looking into the Male connector, which is on the MSPNP, pin 1 is top left.
Could be different though I doubt it. Hopefully they get a chance to confirm soon.

paul

iTrader: (21)

chad assumes correctly. it would be looking at the connector from the back. say its plugged in to the MSPNP. the 2nd wire from the left along the bottom row is #10

yada

iTrader: (1)

Ok cool thats what I thought it was but I wasnt sure. It just sounded like a stupid question in my mind. Thanks for the help!

richard_ha

I had to read the manual and look at lost of pictures too before I was sure of which way it it. Its not the clearest.