and it begins
just order to begin MS
MegaSquirt-I Programmable EFI System PCB3.0 - UnAssembled Kit Lead Bending Tool PCBv3 and v2.2 -- Pullup Resistors 'ModKit' GM Open Element IAT Sensor with Pigtail i will just leave the stock ecu in for fans and idle right now, i will add those to MS later after i get it in a working. i will just use the miata coolant temp sensor, do i need to cut the wire going to the ECU completly and run it to just MS, or can i tap it? i dont know if the stock ECU uses it or the coolant switch for idle controll. be prepared for a couple questions next week :bigtu: i have built 2 MS1 2.2 before, so i should be fine. |
You gotta tap it. You only cut the spark and injectors.
Forget the lead bending tool, its useless. |
I love the lead bending tool. One of my favorite things when building MSs.
|
Originally Posted by Saml01
(Post 184948)
You gotta tap it. You only cut the spark and injectors.
|
All times are GMT -4. The time now is 11:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands