Please review my MS3 spark table
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
Please review my MS3 spark table
Hi!!
I'm loving my Brain built MS3 after ditching my MS1 PnP.
The car feels peppier, smoother.
I realize that the spark map is not specific for my particular car so I want to get opinions before I even consider touching it, bringing it to a dyno etc.
The particulars are as follows :
Sequential F/I
1.6 w Greddy turbo at aprox 8.5 -9 psi boost
EBay intercooler
Fidanza flywheel
Monza 2 & ¼ cat –back
Racing Mazda aftermarket pipe for Greddy
All motor internals are stock
As is the rear end ratio
Car is a 91 with 115k miles.
Thanks for the feed-back
I'm loving my Brain built MS3 after ditching my MS1 PnP.
The car feels peppier, smoother.
I realize that the spark map is not specific for my particular car so I want to get opinions before I even consider touching it, bringing it to a dyno etc.
The particulars are as follows :
Sequential F/I
1.6 w Greddy turbo at aprox 8.5 -9 psi boost
EBay intercooler
Fidanza flywheel
Monza 2 & ¼ cat –back
Racing Mazda aftermarket pipe for Greddy
All motor internals are stock
As is the rear end ratio
Car is a 91 with 115k miles.
Thanks for the feed-back
#7
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
that map is of your creation; my basemaps are very retarded over that and have much more than 3 boosted rows.
how much boost are you running currently?
why didnt you past the screenshot into ms paint, then save a jpg so it could be posted inline?
how much boost are you running currently?
why didnt you past the screenshot into ms paint, then save a jpg so it could be posted inline?
#8
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
Thanks man !
Well, my MS3 sat around cause I had no time to install it so my friend took it installed with sequential wiring. I did not do anything myself. According to him he added 2-3degrees in the non-boost areas, and was scaled to better match the peak boost level.
Don't have a boost gage so I'm semi guessing my boost is around 9.5 psi max
Well, my MS3 sat around cause I had no time to install it so my friend took it installed with sequential wiring. I did not do anything myself. According to him he added 2-3degrees in the non-boost areas, and was scaled to better match the peak boost level.
Don't have a boost gage so I'm semi guessing my boost is around 9.5 psi max
#9
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Florida
Posts: 810
Total Cats: -6
Clocked my MPG today when I filled the tank at 25.79 !!!
That is mostly local driving - not quite a congested stop/go city but avenues with lights at less than 1/4 mile distance and definitely no real highway mileage. I'm sort of amazed
That is mostly local driving - not quite a congested stop/go city but avenues with lights at less than 1/4 mile distance and definitely no real highway mileage. I'm sort of amazed
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM