Can someone confirm these PINs for me
 

On a 96/97 harness, 4R = cyl 2/3 spark and 4N = cyl 1/4 spark (on the pin out it does not say, it just says ignitor).

Also, 1B = thermofan?

Just want to double check before I go start messing with wiring.

thnx.

1B is for the A/C fan, I think. Not sure which pin corresponds to which cylinders, though.

The way I read it, 1A is for the AC fan..

I just took a quick look at DIY's site, so I could be wrong. Idk where I put my wiring diagrams I had when I built my MS.

I was going by this...

http://www.boostedmiata.com/gallery2...ne_harness.jpg

Just look at the colors on the wires to the coil packs at the plug and line it up with the diagram above.

Ya, I guess... but my car is at the shop right now and I`m working on wiring at home.

4R = 2/3 4N = 1/4

On my car the fans were backwards from the above diagram. 1A = main cooling, 1B = AC fan. As far as I know the wiring harness was unmolested until I thoroughly raped it.

https://www.miataturbo.net/useful-saved-posts-8/online-repair-manuals-all-cars-all-years-30224/

That's invaluable if you're going to be dicking around in the wiring harness.

I'm wiring a Haltech up. I have all the other wires noted, I was just unsure of the ignition outputs and the fans. If the fans don't work when the car is running I will swap those two wires and see if mine were somehow swapped as well.

I messed up the labeling. 1A is main fan.

Ok thanks

Son, this thread is a disspoint. I clicked and expected debit card numbers and pin numbers to test at the local ATM, and all I got was some lame pinout diagrams.

Lol