Cant get new build to start. Help!
 

ok here are the specs of the vehicle.
1991 chassis
2002 vvt engine fully forged and turbo, fic 750cc injectors,
supermiata dampner, and 36-2 wheel
using vvt crank and cam sensors.
using vvt coil packs

im attaching the tune, datalog of cranking, and composite log.


hoping to get this car running today.

Also Second issue, This is an mspnp2. But, it wont work with mspnp2 firmware, only microsquirt module firmware. ive been told there were some mspnp2 shipped with the wrong monitor. is this the case?

Well I have an update. I had my coil triggers mixed up (apparently the vvt swap megathread had the colorings wrong) eitherway, it starts and runs and off to tuning now.

Still hoping to hear some info on the mspnp firmware issue though

Update. More issues!
 

Ok so we got the car running finally. Was running but dead on cylinder 4. Did all sorts of diagnosis, from swapping plugs, to compression tests, and fuel injector flow tests, turns out it needed to be set to semi sequential instead of untimed (stupid mistake)

So after that we got it running and up to temp. I shut it down and couldn't get it to restart and when I finally did it was missing heavily again. I did notice my cranking pulsewidths we're near 9, so I'm concerned I fouled out another set of plugs. But I don't get another shot at it untill Friday.
Just figured I'd share my fun with you all