Composite Log No Data
Hey guys,
Im trying to take a composite log on my car (crank no start) to check for cam/crank signals. For some reason I am not seeing any data or data traces. Logs show 0 kb. My procedure is as follows: 1. Start log 2. crank for 5sec 3. stop log 4. click file, save log as "xyz" What am I missing? Edit: It might be worth noting that the ECU is on firmware 1.3.4. So there might be an alignment issue here between TS and MS. However, when I try to update the firmware, it asks for files that don't exist. |
Post a copy of your current tune.
|
Click the “save to file” button first
|
1 Attachment(s)
|
clicking save to file first doesnt help. still no data.
|
update, I replaced the cam/crank sensors and still not starting. I do hear some starter kickback, so maybe there is an ignition timing issue while cranking?
Edit: I tried loading the basemap, adjusting req fuel for the injectors, and no luck there either. |
All times are GMT -4. The time now is 10:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands