MS1 vs MS2 vs MS3
11-15-2013, 12:55 AM
#1
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: CA
Posts: 2,016
Total Cats: 13
MS1 vs MS2 vs MS3
So I've finally graduated (Sept), gotten married (Oct), and have some time to do car stuff since I won't start job hunting until January 2014.
I have a 1.6, but have a 1.8 in my backyard that I'll probably eventually build. The parts I've collected are in my sig, nothing installed. Is there any reason for me to upgrade to a MS2 or MS3 now, or just run MS1 until the engine upgrade?
What are the main advantages or disadvantages I will face w/ MS1 vs the others? Unfortunately, I built my harness and mods over 4 years ago for parallel install and don't remember any reason why I did what I did. Also, I didn't install it. On top of all that, it seems like all MS1 material is out of date and links are broken.
Spanks for any advice.
I have a 1.6, but have a 1.8 in my backyard that I'll probably eventually build. The parts I've collected are in my sig, nothing installed. Is there any reason for me to upgrade to a MS2 or MS3 now, or just run MS1 until the engine upgrade?
What are the main advantages or disadvantages I will face w/ MS1 vs the others? Unfortunately, I built my harness and mods over 4 years ago for parallel install and don't remember any reason why I did what I did. Also, I didn't install it. On top of all that, it seems like all MS1 material is out of date and links are broken.
Spanks for any advice.
Reply
0
0
11-19-2013, 08:47 AM
#3
Newb
Join Date: Nov 2013
Posts: 5
Total Cats: 0
That's helpful.
Top level - as you go up in MS version, you get support of added features and additional resolution of fuel and timing curves. Early MS versions wouldn't support high current injectors and had some limitations in ignition. This is probably a question best asked on the MS boards - include the details of what MS1 version you have.
Top level - as you go up in MS version, you get support of added features and additional resolution of fuel and timing curves. Early MS versions wouldn't support high current injectors and had some limitations in ignition. This is probably a question best asked on the MS boards - include the details of what MS1 version you have.
Reply
0
0
11-19-2013, 06:53 PM
#5
Supporting Vendor
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
A comprehensive table showing model vs feature is found here:
Megasquirt Product Comparison
You may also want to browse through the web forum at msextra.
Megasquirt Product Comparison
You may also want to browse through the web forum at msextra.
Reply
2
2
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
