DIYAutoTune LCD Digital Dash?
Curious if anyone has used one of these yet. Still don't even have the engine assembled and installed, or even a relay cable built yet.. However I'm always looking for something new to tinker with and this thing looks TOTALLY killer!!
http://www.diyautotune.com/catalog/l...23b36d923a9b9c http://www.diyautotune.com/images/pr...ash/lcdash.jpg |
wow but at 400$ i think i will try for better stuff it seems very nice though
|
Yeah the price is why I haven't jumped.. but from what I can tell you can actually tune with it. Save you messing with a notebook
|
It would be very nice to have that. Palms are cheaper though not so awesome.
|
We've done a fair amount of testing before we offered it for sale, and it's likely we may even have pictures of it installed in a Miata before long. :) If you have any questions about it, just let me know.
|
Its cool, but I would much rather have a dedicated palm (less chance of theft, and if i break it I wont be nearly as pissed)
|
The palm with MS is quite a nice tool to have in the glovebox 24/7.
|
Not a bad price for a touchscreen. I'd make a flip out on the side of my center console for it if I installed one.
|
Curious as to what sunlight visibility is like.
|
I'd like some high quality high resolution photographs of the display in operation. The quality of the youtube video was pretty bad and it would be nice for a better representation of it.
btw, defiantly want to see some killer install shots of it in a miata. Where the heck would it go?? Any kind of bezel or beauty trim offered? Maybe a small enclosure that would make it portable? |
Originally Posted by elesjuan
(Post 139865)
I'd like some high quality high resolution photographs of the display in operation. The quality of the youtube video was pretty bad and it would be nice for a better representation of it.
btw, defiantly want to see some killer install shots of it in a miata. Where the heck would it go?? Any kind of bezel or beauty trim offered? Maybe a small enclosure that would make it portable? |
I've got a laptop mounted in the boot and a 7" flip out touch screen to control my MS.
|
Originally Posted by magnamx-5
(Post 139870)
right where brad is putting his portable PC https://www.miataturbo.net/showpost....6&postcount=21
|
It runs the stereo to
|
Originally Posted by magnamx-5
(Post 139944)
It runs the stereo to
I'm thinking of possibly putting one in our '91 Miata and maybe sticking a 1/2din MP3/WMA player under it. Something like this: http://www.gadgetoptions.com/207202/7237090.html You can google 'half din mp3 player' to find several options. As for a bezel that's going to be unique for each car to make it look right-- pretty easy for the Miata though... just put it where the stereo was and use a flat sheet of your material of choice. Black Plastic? Stainless? Red Plexi? Stained Wood? Whatever you want... |
Those half-din stereo's are nice.
What do you think of the Megaview's Jerry? One might fit in the slot where the NB Airbag switch fits. *checking size* |
The MegaView works well too, it's pretty different from this thing though. It scrolls several variables across the screen. You can freeze it on a certain one if you'd like to watch something specific. It's more affordable, the LCDash is more 'trick'. Options ;)
|
Originally Posted by elesjuan
(Post 139943)
Where am I supposed to put my high dollar stereo? :sadwavey::cool:
ps: i will be showing 2 prototypes at HIN in vegas on october 6th. one of them (in my miata) will be hooked up to megasquirt. |
show us now. start a thread
|
yes i want more info on this car pc stuff so far it still looks expensive at 500 someodd bucks please elaborate Urban
|
Now, should I chime in pictures of my latest projects? Why not... :)
Testing the ADC inputs and the converter functions on a louzy 128x64 LCD. http://www.technospirit.gr/images/gauges/lcd_gauge.jpg Driving mode (240x128). http://www.technospirit.gr/images/gauges/ultimate1.png Engine analysis mode (240x128). http://www.technospirit.gr/images/gauges/ultimate2.png Still lots of stuff to get in, most notably the data from the MS (VE, PW, IGN Advance, Knock, etc) and the "Racing mode" display. Jim |
Originally Posted by Reverant
(Post 141193)
Now, should I chime in pictures of my latest projects? Why not... :)
Testing the ADC inputs and the converter functions on a louzy 128x64 LCD. http://www.technospirit.gr/images/gauges/lcd_gauge.jpg Driving mode (240x128). http://www.technospirit.gr/images/gauges/ultimate1.png Engine analysis mode (240x128). http://www.technospirit.gr/images/gauges/ultimate2.png Still lots of stuff to get in, most notably the data from the MS (VE, PW, IGN Advance, Knock, etc) and the "Racing mode" display. Jim Any chance of a writeup? ;) |
Originally Posted by richyvrlimited
(Post 141196)
that's awesome, I presume it just displays?
Any chance of a writeup? ;) I'm still looking for a way to interface a cheap $15 IR pyrometer to this setup (think 3 infrared pyrometers per wheel) plus infrared beacons to lay around the track (track time plus split times) and of course, datalogging to an MMC/SD card. Jim |
Originally Posted by elesjuan
(Post 139865)
I'd like some high quality high resolution photographs of the display in operation. The quality of the youtube video was pretty bad and it would be nice for a better representation of it.
|
can you comment or take a pic of the daytime visibility of the screen?
|
I'll put it on the 'to-do' list for this week to take a closer look, if i can get a good picture I will. I'm guessing open top it will wash out like most anything would, but closed top it should be fairly good. More to come...
|
Thanks, I appreciate it.
|
Props to chris ladden for this product, hes from my town and a good friend. He introduced me to megasquirt!
|
A couple of shots of my prototype. Hint, it reads stuff from Innovate products (ie LC-1, LM-1, TC-4 etc) via the serial MTS bus!
Jim http://www.technospirit.gr/images/ga...iving_mode.jpg http://www.technospirit.gr/images/ga...ngine_mode.jpg |
Pretty awesome stuff man. Now when are you going to mount that badboy? Is it touch screen? How did you get it to read fuel level?
|
Originally Posted by cjernigan
(Post 153445)
Pretty awesome stuff man. Now when are you going to mount that badboy? Is it touch screen? How did you get it to read fuel level?
|
Umm, those are two totally different units. The one reverant just posted is his own design utilizing the innovative products daisy chained together using their base unit.
Don't know why i asked is it touch, when i knew the answer though, of course it is. I'm just curious how he got the fuel gauge to work. |
With all those info .. Reverant can mount that to the dash as Tach, and have a steering wheel that controls them.
|
Originally Posted by cjernigan
(Post 153445)
Pretty awesome stuff man. Now when are you going to mount that badboy? Is it touch screen? How did you get it to read fuel level?
Jim |
Originally Posted by cjernigan
(Post 153460)
Don't know why i asked is it touch, when i knew the answer though, of course it is. I'm just curious how he got the fuel gauge to work.
Jim |
I see, I assumed you were going to install that unit in replacement of the incar-pc. That should be nice in replacement of the stock miata system.
|
That's looks fantastic Jim.
Just need you to build me one for me EMU now please ;) :) |
Originally Posted by cjernigan
(Post 153598)
I see, I assumed you were going to install that unit in replacement of the incar-pc. That should be nice in replacement of the stock miata system.
Jim |
Originally Posted by eunos1800
(Post 153602)
That's looks fantastic Jim.
Just need you to build me one for me EMU now please ;) :) Jim |
Originally Posted by Reverant
(Post 153611)
Gimme the protocols for the EMU and you'll have one in no time mate. ;)
Jim I got shit loads of stuff to ask you. Could also do with your cable tidying skills as well mate, ;) As my passenger footwell looks like a bomb went off in a spaghetti factory :( |
Originally Posted by Reverant
(Post 153414)
A couple of shots of my prototype. Hint, it reads stuff from Innovate products (ie LC-1, LM-1, TC-4 etc) via the serial MTS bus!
Jim http://www.technospirit.gr/images/ga...iving_mode.jpg http://www.technospirit.gr/images/ga...ngine_mode.jpg I'm now waiting for the 'how to' ;) :D |
Originally Posted by eunos1800
(Post 153613)
We need to get together for a pint mate.
I got shit loads of stuff to ask you. Could also do with your cable tidying skills as well mate, ;) As my passenger footwell looks like a bomb went off in a spaghetti factory :( Jim |
Originally Posted by richyvrlimited
(Post 153614)
That is Awesome Jim! massive *massive* Kudos to you :)
I'm now waiting for the 'how to' ;) :D The bomb in all off this is that I will propably develop a dedicated Megasquirt datalogger in the process (connect to serial port, press button, logging to MLV-style log starts). I will need to datalog everything from the MS and the MTS chain in a single stream before displaying on the LCD, so this will be fun. Jim |
Originally Posted by Reverant
(Post 153623)
Thanks for the kudos Richy. The how to is somewhat of a tricky thing as the entire concept will revolve around my specific settings and needs.
The bomb in all off this is that I will propably develop a dedicated Megasquirt datalogger in the process (connect to serial port, press button, logging to MLV-style log starts). I will need to datalog everything from the MS and the MTS chain in a single stream before displaying on the LCD, so this will be fun. Jim It's a brilliant project, I'm super impressed, and rather jkealous that I don't have the know how to be able to do something similar! keep posting you progress then I can carry on dooling over your work :) Tob job again mate :bowdown: |
I just stumbled across this and I must say that it looks *awesome* :bowrofl:.
Any progress on this? Me want :). |
Your's looks great. I am friends with chris ladden (same hometown), one of the developers of the lcdash sold on diyautotunes site and i must say, i really wish his offered all the things urs does right now. Price is still too high for chris' lcdash tho
|
Thanks guys. Right now, I'm developing a SSI-24, that would be like an SSI-4 but with 24 inputs (8 analog 0-5V, 16 on/off) so that I can grab everything I need from my sensors (see sig). After that, the display is up next.
Jim |
Keep up the good work, Jim!!!!
Man what I'd give for something like the MOTEC displace in place of my factory gauge cluster.... http://www.motorsports-exchange.com/.../aim/aimxl.jpg Yours scaled up would look just as good! |
FYI, my intention is to have this big LCD in the middle (where the tach and the speedo is), with two smaller LCDs (one on each side of the main LCD) where the fuel and water temperature gauges are.
Jim |
All times are GMT -4. The time now is 07:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands