diypnp base map?
Hi guys, my diypnp's firmware somehow got corrupted. So long story short after many failed attempts of reloading I finally got it to work. But then I realized my maps were for the 3.0.3 firmware, and not the 3.2.1 that I now have loaded. I'm getting multiple configuration errors, and a tach error. The tach on tunerstudio is also maxed out.
Is there anyway to convert the map to 3.2.1 or does anyone have a map for the new firmware? I currently have stock ignition and injector size doesn't matter cause I can just change req fuel. Also running about 10psi of boost but can scale the map to whatever. Thanks for you help guys, I appreciate it. |
They more or less convert over - you need to make a few changes like the tach output pin.
|
Thanks Matt,
So what pin would I change the Tach output to? If i recall correctly its wired to pin 3k but there is not an option for that. Am I missing something here? |
All times are GMT -4. The time now is 03:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands