Extra ECU Connectors
 

I have spare ECU connectors available for sale, if there is enough demand, I can order more as necessary, the only problem is I need to buy it bulk. I bought these connectors specifically for a 96-97 plug n play MSnSe install, and you can see in the last pic the harness I made for myself.

http://img.photobucket.com/albums/v3...0/IMG_2573.jpg
http://img.photobucket.com/albums/v3...0/IMG_2574.jpg
http://img.photobucket.com/albums/v3...0/IMG_2575.jpg
http://img.photobucket.com/albums/v3...0/IMG_2576.jpg

Please note one connector is missing because the supplier did not have any in stock. I also have a very limited number of pins. If people are interested, I can prepare 96-97 harness kits which will include the male connectors, pins, and female connector. I do not think the 91-93 and 94-95 connectors are the same, but if people can take a pic or give me a part number I can get them.

Prices are best offer, post or PM, located in Los Angeles but can ship.

I would like one for a 90. I will try to figure out what one is the correct one.

Where are you guys ordering the connectors? I'm thinkin' about redoing the install for my EM-B... and putting the harness back to stock.... (well maybe anyway. <G>)

Dave,

I got mine from Boomslang. I just purchased the ecu plug, my MS harness is getting wired into it for my standalone setup.

I am very interested in them, I have a 97 and wanted to do the exact same!

if you have the connector p/n you can get them direct from the manuf as samples. They'll generally sample five each IF they have them in stock. You might be lucky and get 50 pins, but that's not enough--you need twice that for all the connections and spares.

I was able to find the 2001 stuff at www.onlinecomponents.com

Can you post the part numbers for the 2001?

TYCO / AMP.... you'll have to figure out the ECU side connector yourself--nobody stocks it that I've found. I got one a while back from BRP or whatever they are.

Connectors:
353027-1 (17 pos)
353029-1 (24 pos)
353031-1 (31 pos)

Pins:
316836-1 (72 minimum required)

I realize this is an old thread, but to go along with y8s's P/Ns above, I have found the ECU main connector for the 2001-2005 NB appears to be an AMP/Tyco 353830 family. I ordered samples of the 353830-5 and -6 to see if one will be better than the other.

where'd you order samples?

the -5 and -6 are probably just plating differences. or plastic material/color changes.