Garbage boomslang connectors
It's just not working. Those little connectors aren't fitting in the housing and I'm apparently missing the slightly larger outer connectors. I'm a little pissed and I'm just wondering if I can just tap into the wires going into the ecu. For anyone familiar with the voodoo box kind of like that. The little clamp goes on the wire and I just plug my MS connections into that. Could this work? It would be just as reversible as the boomslang just a little more time consuming since it's not in a convenient little one push harness clip.
And.. Is the shielding from the white wire on pin 24 supposed to be soldered to pin 2 on the DB37 connector? |
Originally Posted by rccote
(Post 344190)
Those little connectors aren't fitting in the housing
crimp them better. |
Originally Posted by Braineack
(Post 344272)
crimp them better.
Originally Posted by rccote
(Post 344190)
I'm a little pissed and I'm just wondering if I can just tap into the wires going into the ecu. For anyone familiar with the voodoo box kind of like that. The little clamp goes on the wire and I just plug my MS connections into that.
http://www.parts-express.com/images/.../082-140_s.jpg They'll work reasonably well for most of the signals so long as they're properly sized- red for 18 to 22 gauge, blue for 14 to 16. I don't like them as they create a focused stress point upon the underlying cable (promoting breakage), but I do admit to using them from time to time. The one area where I'd not use them is for the grounds. You've got some serious current flow here, you need to ensure as little voltage drop as possible, and you want a serious connection. Cut the factory wires and use solder or butt-splices to insert a pigtail to which the MS can be connected, by way of insulated disconnects or barrel connectors if you absolutely require removability. Is the shielding from the white wire on pin 24 supposed to be soldered to pin 2 on the DB37 connector? Just use a piece of regular ole' wire for the crank sensor signal. |
I use this: D-Sub Pin Crimper - RadioShack.com
for the .040" contacts. Needle Nose pliers for the .070" contacts. When you squeeze them, you have to make sure the crimp doesn't extended out, else it wont fit in the hole....it will fit if you shape any overhang vertically. |
If you cant get them into the plugs then you are probably using wire thats too thick.
20 gauge is ideal. |
I'll admit my crimping is pretty shitty so I'll quit dicking around and pick up the proper tool. Hopefully radioshack carries those contacts too since two are pretty much toast. It also looks like they screwed up my order and only sent me the 0.040" contacts and not the 0.070" ones. That explains some of my frustration. I'll just use the vampire taps as a plan B I guess. Thanks guys.
|
fwiw I used to run that yellow plug, but maybe mine was manufactured shitty but i had all kinds of problems with pins breaking off of it (and my car subsequently spontaneously not running anymore) so I cut the whole business out and cut pieces of insulation off of the wires on the harness I needed and soldered each wire into my harness like that, leaving the stock harness plugs intact.
You might not have this problem though, cause I relocated a lot of wire and put everything in the footwell. I had a girl press down on it with her foot once and my car died. Not great for a date. :cool: |
Dont tap the factory wiring, wait for more clips or buy them somewhere.
I am warning you, its not worth fubaring the factory wiring. |
Originally Posted by Saml01
(Post 344423)
Dont tap the factory wiring, wait for more clips or buy them somewhere.
I am warning you, its not worth fubaring the factory wiring. Edit: I will say though that in my experience any of those plastic splicer things, really any and all of them, when you use more than three of them on the same project it quickly becomes a nightmare. solder is your friend. |
Got all the 0.040" contacts in nice and neat. I now realize they need to be crimped a lot smaller than what I had to go in smoothly. Just need to put in the 0.070" contacts and this boomslang is almost done. Does anyone know if a local radioshack would carry the 0.070"s or do I need to reorder them.
|
Radio Shack carries virtually nothing in terms of crimp terminals other than Molex 062 and DB-style pins. You'll have to get them elsewhere.
|
:td:
|
All times are GMT -4. The time now is 01:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands