Menu change confusion in latest tunerstudio
06-06-2017, 09:33 AM
#1
Newb
Thread Starter
Join Date: May 2017
Location: Toowoomba, QLD. Australia
Posts: 19
Total Cats: 0
Menu change confusion in latest tunerstudio
Hi,
I'm working through building up my MS2DIY for my MX5 and am up to setting things up in Tunerstudio. Having a good time without any dramas so far.
I see references to 'Spark out inverted = yes' now I've done Joe's 'better spark out circuit' as an important setting but the closest thing I can see in TS v3.0.22 in the ignition options is 'Flip polarity on Cam = Normal/Inverted'. Is the option gone in this version or am I looking in the wrong place?
Also is my Spark output supposed to be 'going high" or 'going low' for my case. I've had trouble finding a complete guide, with some images around the net now having dead links etc. Starting to get a little confused.
I've got a '90 1.6L, 420cc injectors, stock coils, MS2DIY with Joe's better spark mod, idle control mod, fan relay control mod. Hopefully that's enough info.
Thanks in advance if someone has the time to help.
I'm working through building up my MS2DIY for my MX5 and am up to setting things up in Tunerstudio. Having a good time without any dramas so far.
I see references to 'Spark out inverted = yes' now I've done Joe's 'better spark out circuit' as an important setting but the closest thing I can see in TS v3.0.22 in the ignition options is 'Flip polarity on Cam = Normal/Inverted'. Is the option gone in this version or am I looking in the wrong place?
Also is my Spark output supposed to be 'going high" or 'going low' for my case. I've had trouble finding a complete guide, with some images around the net now having dead links etc. Starting to get a little confused.
I've got a '90 1.6L, 420cc injectors, stock coils, MS2DIY with Joe's better spark mod, idle control mod, fan relay control mod. Hopefully that's enough info.
Thanks in advance if someone has the time to help.
Reply
0
0
