vrmmmpshhh

hey guys, just picked up a used mspnp 9093 and i just cannot get it to connect to my laptop. i spent all afternoon trying. is there a way to power the mspnp externally and try communicating with it outside the car? The car is powered by a greddy emanage atm and id rather not have it off the road for ages just because it wont communicate.

I have a gymkhana tomorrow and disconnecting the factory loom has erased all the factory ecus memory so idling is messed up now . id rather that not happen again.

Braineack

iTrader: (62)

yes, you can run 12v to 1B and ground to 2A,B,C,or D


the stock ECU doesn't lose programming.

vrmmmpshhh

awesome that makes things much easier. I havent opened up the MS yet but is there a light/led inside to show there is power going to it?

Miater

Of course it comes with lights. They will tell you.

Braineack

iTrader: (62)

yeah it will glow red. just be hella careful you use the correct pinage and then don't accidentally touch extra pins with the power supply.

vrmmmpshhh

i have just opened up my mspnp and there is nothing that resembles any kind of light?? its a ms9093 v1.3 if that helps.

Braineack

iTrader: (62)

there are 3 leds. they are stamped and very tiny.