Gm IAT wires not same as in instructions. urgemt
So mounted the iat in itercooler worked like a charm.
Now go to wire it to the old maf and the electrical hook ups dont match pics on diyautotune instructions. We can over come this by just figuring out which wire are which using an ohm meter. On the ms there is a iat pin so that where one of the wire goes but where does the other go sensor ground or something else. my maf elect connector has 7 pins. |
Do yourself a favor, stop, search, and roll. Well, stop and search.
http://www.megasquirtpnp.com/models/...#Section_Three Took me one search to find. |
Originally Posted by 90 Turbo
(Post 824079)
Now go to wire it to the old maf and the electrical hook ups dont match pics on diyautotune instructions. We can over come this by just figuring out which wire are which using an ohm meter. On the ms there is a iat pin so that where one of the wire goes but where does the other go sensor ground or something else.
my maf elect connector has 7 pins. The picture you want is a little over halfway down the page. |
Originally Posted by 90 Turbo
(Post 824079)
On the ms there is a iat pin so that where one of the wire goes but where does the other go sensor ground or something else.
http://www.megasquirtpnp.com/models/...s/image022.jpg use these two positions. The black wire is actually the AIT signal pin, and the red wire is the ground...doesn't matter which is which. |
sorry I did search 1.6 maf and got nothing. I appreciate the help i was using this link for the instruction
http://www.diyautotune.com/diypnp/ap...3-16b6-mt.html |
they used the wrong picture. the one i pulled was from the mspnp docs: http://www.megasquirtpnp.com/models/...093_manual.htm
|
All times are GMT -4. The time now is 12:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands