Help Going from MS3 to MS2PNP
3 Attachment(s)
Good afternoon, I had my miata with a ms3 tuned years ago and everything has been great except the ms3 doesnt support air conditioning, but was tuned for it. So when I turn the AC on, it can't route the power draw and cuts the car off.
I finally got a ms2pnp and tried to load the settings from the ms3 into the ms2pnp as I was told that would work, but low and behold it didn't. There was a ton of errors. Can anyone help me directly or point me somewhere were I can find out out how to get thhose transcribed? I was so excited so I jumped the gun, which is my fault, but want to get the car back up and running. I have included the msq file of both the ms3 tune, the ms2 tune when I tried to import the settings, and the error log I got. any help would be greatly appreicated! |
Haven’t done this on a while, but a lot of errors can be ignored, it’s just saying it’s filling in decimal points and tables with default values that don’t exist with the MS2. That being said, you’ll still need a retune. There’s a ton of settings in ms3 that’ll help it run better, including AC. without tuning them, it’s sort of a waste
|
Originally Posted by curly
(Post 1631541)
Haven’t done this on a while, but a lot of errors can be ignored, it’s just saying it’s filling in decimal points and tables with default values that don’t exist with the MS2. That being said, you’ll still need a retune. There’s a ton of settings in ms3 that’ll help it run better, including AC. without tuning them, it’s sort of a waste
|
All times are GMT -4. The time now is 09:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands