Help locating Firmware for 3.0.3h startup map?
 

Completed the DIYPNP kit for NB, have loaded most recent version of firmware, but when I load the startup map, I get tons of errors.

The tunefile config is: 3.0.3h

The config signature is MS2Extra Comms332mM

The closest I am able to find is 3.1.0 at:
http://www.msextra.com/doc/ms2extra/...ease/obsolete/

Nothing in the 3.0.x family.

I haven't been able to find a 3.0.3 based firmware to upload and its not clear if there is a version of 3.x.x that is backwards compatible. Please help me identify and locate which version of firmware I should be using. Thanks.

Per this thread on MSExtra.com,

Megasquirt Support Forum (MSEXTRA) • MS2/Extra firmware 3.3.2 released - use this (View topic)

Everyone is directed to install the latest firmware which fixes bugs. This is what I have.

How do I reconcile the differences in the startup map with the suggested bug-free version of the firmware? There are 60-70 errors.

From diyautotune.com

"The firmware versions are sorted on this page from oldest at top to newest at bottom. Generally speaking, you'll want to choose the newest version of the firmware at the bottom. However, if you planning on using one of our start up maps for your application, you will need to make sure that you install into your DIYPNP the same firmware version that our start up map was built on in order for the base map to load in 100% clean with no errors. For example, if our start up map was built on 3.0.3H, and you wish to use our start up map, please load 3.0.3H into your ECU. Alternately you can choose a newer firmware version from the sames series (maybe 3.0.3J for example, which would be a later release of the 3.03 firmware), and in many cases most all of the settings from our base map will load right in, though it may give you a couple warnings to review that often can be disregarded (though you should review them to verify). "

ignore the errors.

I'm just being cautious so I don't blow things up. Thanks.