help with MS.
hey, where can i find the thread to make the harness for a '91 going standalone?
the one that's already posted is for a 94+ and i know they're different. any help would be appreciated. i've got a ms1 with the connector to make it plug and play at the harness. i wanna build the harness. please let me know if i'm confusing anyone. thanks! |
|
cool! thanks man! i knew i saw something like that before. i'll build it up tomorow and see if it runs or what. thanks again!
|
double check all the wires and their pins on your harness. my injector blue and greens (32/33 and 33/34) were switched by accident. must have been built on a monday.
|
Hi
My diagram is still a bit of a work in progress. What I didn't put into the diagram and according to people who know more than me (in the link below), is that if you are using a 90-93 TPS you dont connect pin 22 and pin 26. I didn't know this at the time, but have left the wires in anyways, for later, if I end up wanting to update my TPS to a proper position sensor rather than the on/off switch the 90-93's come out with. 90-93 DB37 Pinout |
All times are GMT -4. The time now is 08:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands