How do I set up a shift light on my 96-97 Megasquirt PNP
Hey guys I need to know how to set up a shift light for my 96-97 Megasquirt PNP. Which pin do I tap into on the unused ten pin harness. I will be using a 12v 10mm LED light that comes on at 6200 RPM.
|
This link tells you more about how you can use a shift light.
http://www.msextra.com/manuals/MS_Ex...l.htm#shiftled You have to build a small circuit for it to work right I believe. The processor itself might be able to pull your shift light to ground but i have no idea what current its capable of controlling. If i was going to do this I would build the circuit for the relay switching and set it up appropriately. |
I'm going to use the shift light circuit to activate the short runners in the intake...will my set-up go the same way?
|
It will be one of the four outputs, should work fine.
|
All times are GMT -4. The time now is 01:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands