car almost dies when i turn my lights on??
#1
Bannisheded
Thread Starter
iTrader: (33)
Join Date: Jan 2009
Location: San Jose, CA
Posts: 1,056
Total Cats: -3
car almost dies when i turn my lights on??
i just recently installed my MSpnp and i everything runs fine i think? well i took the car out for the first time at night and so im backking out of my drive way and turn the lights on and the car almost dies. it gets down to 100rpm
And this justt started happening after i installed the MS ecu.
anyone else have this happen to them? maybe i have to tune something?
And this justt started happening after i installed the MS ecu.
anyone else have this happen to them? maybe i have to tune something?
#5
Good luck, a lot of us are having this same problem and all the "tuning" we have done hasn't solved it. I (and a few others by the sounds of it) just turn the idle up a little bit so that it is on the high side when all accessories are off, but droops to a normal level when they are on.
If you find a better solution please let me know what it is.
If you find a better solution please let me know what it is.
#6
Good luck, a lot of us are having this same problem and all the "tuning" we have done hasn't solved it. I (and a few others by the sounds of it) just turn the idle up a little bit so that it is on the high side when all accessories are off, but droops to a normal level when they are on.
If you find a better solution please let me know what it is.
If you find a better solution please let me know what it is.
#10
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
I've found that reducing the allowed minimum DC of the idle valve in Idle Settings can get the idle to drop down a little further. If you go too low you get idle droop issues, though. I'm still fiddling with the 99 motor idle; sometimes it's spot on, sometimes it's a little high.
#12
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,022
Total Cats: 304
I just noticed a similar problem to this with my car about 10 minutes ago. I was driving home from my friends house in the dark, while doing a datalog. I got the car home and I saved all my information, then I turned off my headlights. The AFR's changed. I have my MS wired in parallel using the factory wiring to the ECU to power the MS. Maybe I have some sort of grounding issue?
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM