EErockMiata

I thought of this thread while doing some research on updating my MS3 Basic from it's current firmware release of 1.3.4 to the new 1.4.X firmware. I figured it might be nice to have a thread here to discuss firmware updates.

The idea would be similar to the seat mounting thread or aero thread. It's always impossible to get posters to re-use a template for each post but we'll try it anyway.


MS Model: (MS3 Basic, DIY, MSpnpPro)
MS Unique/Special Specifics:
Current/Previous Firmware Version:
New Firmware Version:
Impressions of new firmware:
Issues:

Maybe this is a dumb idea... maybe it isn't. I wouldn't mind seeing some firmware discussions from those that I've leached, lurked and learned from.

aidandj

iTrader: (5)

MS Model: MS3/3x DIY
Previous: 1.4 Release
New: 1.5 alpha
Impressions: Nothing new to report. Dome boost control is being implemented, along with engine states, but I don't have a dual solenoid setup to test dome control, and the engine states are currently just for logging and testing.
Issues: None

Chiburbian

iTrader: (1)

Dome?

aidandj

iTrader: (5)

Dual boost control solenoids. 1 for the upper wastegate diaphram and one for the lower. Allows you to run as much or as little psi as you want.

Braineack

iTrader: (62)

msextra.com

EErockMiata

I of course realize that msextra is the first stop. However i've found that on this side of the MS universe we do a few things that aren't quite as common (can wb02 module). When I'm reading on msextra I often find myself wondering if a feature that's listed in a firmware update applies to our cars. Yes I know,

For example, in the 1.4 firmware release thread (at this link) it lists...

Under features:
-CAN Broadcasting - two new options
Holset HE351VE VGT turbo - this broadcasts 'boost duty' with a 29bit CAN identifier specific to the turbo.
-User defined testing - allows custom CAN packets to be broadcast
-CAN Realtime Data Broadcasting - this is a major enhancement allowing all of the engine parameters to be broadcast to the CAN using standard 11bit identifiers which can then be received and displayed by suitable 3rd party dashes or dash loggers.
-CAN Receiving - another major enhancement is the ability to receive and process standard 11bit CAN messages. These can be used to collect remote sensor data or wheel speed from ABS

And under known issues:
"can_in" polling setting corrupts "can_out". See Megasquirt Support Forum (MSEXTRA) ? Bug: 1.4 Firmware and IO Extender (View topic)
CAN passthrough may have issues with some older IO-x firmwares.
Boost by speed scaling issue.

After doing a lot of looking on msextra, it seems that per capita of ms users, this forum has a lot more people gravitating to the CAN functionality. Seeing those as part of the new firmware made me wonder if anyone here had insight on the new firmware. That's really what made this idea pop into my head. I find more succinct answers here that are easier to apply to my MS life on this forum then over there.

TL;DR I am a

Also, for the record... using CAN or even "can bus" as a search term sucks.

WestfieldMX5

what's the point of this thread?

hraday93

Subbed

aidandj

iTrader: (5)

If you are using a DIY or Brain product then all of the new releases and features apply to you.

Holset HE351 has a CAN controled VGT actuator that is finally getting real support. It has been in testing for a while.
IO-x is an expander board made by a 3rd party, only relevant if you have his expander board.
If you aren't using boost by speed then the other issue isn't needed.

The biggest issue on this forum is that a lot of people use a MS3Basic, which is different than your standard builds on msextra. But as far as I know it uses an MS3 chip, which means any firmware can be loaded. @Reverant can comment on this.

Reverant

iTrader: (10)

Holset control has been removed, as that specific turbo works at a different baud rate than the MS3.

aidandj

iTrader: (5)

dammit. we were going to be trying that out on my friend turbo e30.

stefanst

iTrader: (1)

You could use a teensy board with native CAN to translate.

aidandj

iTrader: (5)

There are a variety of options. Native MS support was just the coolest.