I want to peek at your Fuel and Spark tables
 

At the risk of scaring the shit out of Chad :gay: I'd like to take a peek at some of your Fuel and VE tables. I'm seeing my WB gauge show lean numbers when the car is between 2,000 and 3,500 RPMs and would like to compare.

Thanks,

Rafa

FWIW Rafa. The map i sent you I richened all those values up. The MSQ you return to me each time though has the old fuel table that is way to lean in those areas.
First is your original, second is the one included in the Rafa27.msq file.
It's not a good idea to share fuel tables Rafa. Their reqfuel is most likely not the same so be careful please. You can see the differences between these two tables very easily.
http://i29.tinypic.com/f4dvfo.pnghttp://i28.tinypic.com/7251rb.png

i would like to see someone's tunned spark table to compare to also

I know you did but I was basically trying to get some idea. I'm trying to see the spark maps more than the fuel maps to be honest. I just changed some settings in my table (please don't hit me!) because I was getting some knock between 2,000 and 3,000 rpms and those cells looked to me like they had too much advance compared to others in the same range.

Rafa

Chad, I'm glad you posted that; I had already changed some manually so I wasn't comfortable. FWIW, my car gets better and better. It's beginning to idle fine with the A/C on (I guess the idle valve is doing its job!) and it's running smoother.

BTW, I know it's not a good thing to use someone else's maps but it's worse to change one's own settings without good info to back that decision.

Thanks,

Rafa