RuckRider

Hi guys im installing a wideband on my car w/ megasquirt its a LC-1 w/ dx16 guage and i was wondering how should i set up my wideband settings? do i use the innovate program or the Tunerstudio? or Both? Thanks

Forrest95M

TS settings, should be in project properties, set to LC-1 gauge set to give of 0.5-1.5v lambda. Don't forget to calibrate the wideband in fresh air!

RuckRider

i did thanks!!! its all working now, another question. do you usually wait for the wideband to read h99 or heat it up before starting the car? or there wont be any problem with just starting the car right away

Forrest95M

I usually do to tune in my ASE and early WUE to give me as close to the 14.7 as i possibly can.Once you have that tuned I don't think it matters as long as the car is at idle

RuckRider

another thingy my rpm seems to be alittle bit high, I have the registered version for tunerstudio so im able to use the "auto tune" feature. should I turn the idle screw to get my 850-900rpm range idle? and let autotune fix the afr?

Braineack

iTrader: (62)

no, tune idle control.

RuckRider

any suggestion or guidelines/tip on how i can tackle it? i just instslled the ms and im fairly new with it.