MiataFox

I need a base map that some one is using in their stock 90 Miata, so they know it works.

I have no clue what i am doing wrong but nothing i do works. I did find a map some one posted that half way works, but still was not right. Every time i tried to change a setting ever thing locks up on me.

I have no clue if I built it right. I used this to build the MS 2. Megasquirt 2 Assembly - Miata Turbo FAQ

and wire my car the same way .

I need some help please.

curly

iTrader: (25)

Have you tried the MSPNP base map? Not sure if it'll work, but worth a shot.

MegaSquirtPNP by DIYAutoTune.com

MiataFox

Yes i tried the MSPNP base map .

MiataFox

Curly can you or Braineack check this MS2 out for me ??

curly

iTrader: (25)

If it's locking up on you whenever you change a setting, have you tried a new laptop?

Ben

iTrader: (33)

Too much pr0n on laptop. TunerStudio requires minimal resources and can run on really old equipment. Reload win'dohs and/or replace your failed hardware.

aidandj

iTrader: (5)

I think you probably need more RAM

MiataFox

It is now not talking to my desktop ?? and i do not look at **** my wife is super hot ^^

MiataFox

i'm going to re-flash the MS2 program

MiataFox

now i get unknown and gives some E!: kind of stuff

deezums

iTrader: (3)

If you can't even be bothered to properly list the errors nobody is going to help you no matter how much you beg.

But just keep asking for basemaps, that will fix it.

MiataFox

I did list the one i have right now I CAN GET IT TO TALK TO TunerStudio MS at all now and the ERROR I GET is some junk i do not have on my keyboard looks like (E!~)

And on top of it i get no ERROR to list and they tell others you will get them loading a base map.

I think i got hold of bad firmare and it is f me up which would account for a lot

and yes i ask for a good basemap for the ones i have did not work and yes I'm a to most of this I never use a MS be for < I'm learning .

MiataFox

Settings Configuration Error. Tuner Studio is online. Correct settings and power cycle controller. Reported setting error. MAF or MAF MAPP enabled. You need to enable a MAF sensor port. You need to correct this error, and power cycle your controller.
This is the error I am getting now.

MiataFox

I use this to set up my Harness
the one at the bottom of the page is it right ??

Megasquirt 2 Harness Assembly - Miata Turbo FAQ

Joe Perez

iTrader: (8)

Ben speaks the truth.

I used to run TunerStudio on a Pentium 3 with 64 megabytes of RAM. It wasn't snappy, but it was reliable.

MiataFox

Well this PC has 8g of ram in it and a 2 core AM3 ADM

I'em going to wire ever thing direct and not use the miata wiring . and i'm off to sleep have had no sleep for 2 days working on my car good night all

MiataFox

I found some thing strange the Harness layout shows Fans on 29 /iac2a but the way it shows to set up the MS2 puts it on 27 Iac1b and the harness layout show that 27 is use for EBC. can this be messing me up ??

Braineack

iTrader: (62)

you built a v3.0 ms2 but didnt make sure to build the harness to the way you built the board or match the software tune to those?

sixshooter

iTrader: (12)

We'll be the judge of that. Pics or temporary ban.

That's the rule. You mention her looks and you must produce pics.

MiataFox

I use what i found if you take the time to look at the link you know there are no longer pic on some of the stuff and links are mess up and the software was form auto diy tune and base map .

My soft ware was fine in the end just the crappy built post that was f up

If you all are as good as you think one would think your post would be up to date and pic be where they belong .

You have post WHERE YOU PUT LOOK AT THE PIC TO BUILD IT OR COPE THE PIC AND THERE IS NO PIC . ???

How was i to know the harness was not set up for that build WHEN THE LINK TAKES YOU TO IT FOR THAT BUILD

Thanks for not taking care of your post it let me wast a crap load of time . I'EM GOING FISHING AND TOSS THIS MS TO THE FISH