Sequential inj not working
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 323
Total Cats: 2
Sequential inj not working
I have a DIYPNP built by brain.
The seq inj was working fine with my old injectors.
I swapped out injectors and the car will only start if it is set to untimed.
Is there something else I have to change to make rc550 work w sequential inj?
Old injectors were green top supra.
The seq inj was working fine with my old injectors.
I swapped out injectors and the car will only start if it is set to untimed.
Is there something else I have to change to make rc550 work w sequential inj?
Old injectors were green top supra.
#2
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,490
Total Cats: 4,079
that's odd. it shouldn't make a difference. what clyinders aren't firing? even in untimmed if additonal drivers are on it should be using the extra seq drivers. otherwise only 2 should be firing.
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Dec 2006
Location: San Francisco, CA
Posts: 323
Total Cats: 2
How do I find out which cylinders are not firing?
Injectors are kind of hidden under intake manifold so I can get a volt meter on them.
My original msq has seq and my car used to run somewhat decent on it.
Now it won't start the car so I'm using a map I got from track dog.
I noticed TDR's map is using untimed. When I change it to seq, it will crank but not start.
Injectors are kind of hidden under intake manifold so I can get a volt meter on them.
My original msq has seq and my car used to run somewhat decent on it.
Now it won't start the car so I'm using a map I got from track dog.
I noticed TDR's map is using untimed. When I change it to seq, it will crank but not start.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM