Injector connector/plug
 

Where can I buy fuel injector connectors/plugs for my stock miata injectors?
I dont want to hack into the factory injector wiring so i would rather buy new connectors and make my own wiring.
TIA

Why not just get injectors from the FAQ that plug in?

+1 on a PnP injector...

you can find pigtails anywhere however...

i wasn't able to remove the FI harness from my car. one of its connectors is behind the head, and I was afraid that I would not be able to reconnect it to the new harness. so I put new injector clips on my original harness. took 10 minutes to make the 8 connections, plus another 5 to tape it all up to look like stock.

+1 i just used bullets on mine so it was reversable.

I want to use my existing injectors and I want to make a dedicated wiring harness for the injectors that would be connected to my megasquirt system.

so you want to run 8 injectors? i dunno if you can do that staged.

why? the ms can run 4 big injectors just fine.

i think he has injectors other than the oem ones....

it's easier just to wire in the pigtails...then just use the ones you need. so you have a total of 8 clips, but 4 injectors...

Why use ms as a sub injector controller when you can just run MS as stand alone?

well he needs to fucking lean english
and say "please" and "thankyou"

:rofl:

I have a stock injector harness (not sure if it's the 94 or the 2000 o.O) that I think I'm going to cannibalize for the plug that interfaces to the main harness. I suppose I could sell the stock connectors (actually, I could sell pretty much the whole harness minus the connector at the end). What's your budget?

-Mike

$20.00 plus postage? i need to find out what year its from though. I dont know if 1.8 connectors are compatible with 1.6 injectors.

Lets simplify the question:
I am looking for injector connectors. where can i buy them?
I dont want to cut and plice into the existing factory injector wiring harness.
that was easy!

which injector connectors?

DSM, FORD, etc.

Just pull them from the car that has the injectors you want. but seriusly unless you want to run some non PNP injectors why change. And if you are then why does 8 wire splices scare you so we run batch fire injection geez. The harness comes off the car easily, and the wires are just wires. Why make more work?

they're not

90 mazda miata 1.6l engine

Private Pyle, why do you need new mazda injector connectors? You already have them on your mazda engine.

oh now im confused.....

Ok Rdsnake i am going to try to be nice. M2cupcar has a leed on a harness if my memory serves me correctly. But please explain why you dont want to modify what you have. Becouse you are making no sense to anyone right now. Stop confusing us and spell out the plan, this is very annoying. :crx:

why is everybody so confused with the question?
Isnt it simple enough to comprehend?
I want to buy injector connectors for my 1.6 and i dont want to cut and splice the factory ones. I dont want to buy PNP injectors

the difficulty in communication is on YOUR end.

Scott's already banned 2 people today. Good things come in 3's ya know.

then you don't want 1.6L miata connectors....you want X injector connectors.....


actually I unbanned Jwarriner and banned 09Puma

I've got a spare harness. The four injector connectors have been cut off but I still have them. Make me an offer.

I don't see what's so confusing. He does not want to modify his stock wiring at all. He wants to build an injector harness that can run straight to the megasquirt, completely bypassing all his stock wiring. So he needs some connectors that will fit stock 1.6 injectors in order to build said harness.

-Mike

Thank you, Mike!!!!

I dont really care if you guys ban me....For such a simple question that you guys couldnt understand........:td:

Jayc72:
$20.00 shipped.

The shipping would cost me more than $20. Start checking out junk yards, check out Braineaks FAQ, he's got all the PNP injectors listed ... I'm sure that one of those cars could be found locally.

I have 6 connectors with pigtails. They're old plastic and a bit cracked in some places, but if you want them, I'd sell cheap.

:inout: (I have wanted to use this for the longest time)

+1

"what don't you guys understand? I very clearly hinted at what I might be trying to do kinda"

Well now it becomes clear you don't want any splices. now it makes sense. You might check with Mazda on replacement connectors. Or a junk yard and ruin some other harness they are just mini blades FWIW why not just plug them in and tape or whatever epoxy them in place, some how. GL man

check post #1

And we asked why. Then you got all buthurt and someone finally guesed you told them they where right and then, we told you what you probably already knew. See this was very informative wasn't it. :rofl: For all we knew you where doing a FI'ed CB750 or something using some miata injectors, in either case using used injectors or just wiring it up like i said is probably going to be your best option.
Ya know if i was a mod i would probably lock this thread now. But since i am not, i will be happy to be mean and make fun off you if you continue to be so damn emo :D

butwrapped? please define the word
"make fun off me"? please explain this one, too.

you are so funny!!!

That was the term i used. It was started by some rx7 guys i believe, and is likened to a person taking a foriegn object up there ass. In other words get the stick out of your ass redsnk. I know i have been, a running joke, around here with my gramatical eccentricietys but, most of them stim from people. Either being silly or genuinely not getting the jokes i pwn off sometimes. But then agian a person with your vast inteligence and breeding (the in kind i believe :pitlab:) would already know this. So go cut your self emo boy before i get pissed off. :bigtu:

Stim?
Gramatical?
Eccentreicitys?
agian?
inteligence?
Caveman may know how to turbo a miata but spelling may be a totally different story....

Spell check is for people who actualy care. Just like it is still easier for me to mod a harness than to find new connectors splice and dice it all into place and then all i would have done would be reinvent the wheel. If it isn't broken then do not fix it.

I think the problem here was typically when someone asks for connectors they are talking about ones for RC or Ford or DSM injectors.

I interpted your first post as you didnt want to have to cut off your connectors and add news one, and you wanted another harness for either or.

I think it would have just been easier to ask for some oem pigtails, and made your intentions a bit clearer.

Braineack:
rs-autosport.com sells injector connectors but theyre not OEM. http://www.rs-autosport.net/catalog/...php?cPath=3_50 .
I wasnt looking particularly for OEM connectors. I was looking for connectors, regadless of make whether OEM or aftermarket.

well I know exactly what you need now, and can provide them, but with all the non-sense, I'm not helping out.

what you need are Nippon-Denso Type "F" connectors with 2 wires. They can be found on supras, miata, 626s, etc. I suggest looking at my FAQ list of injectors that fit the miata connectors and seeing where you may be able to source (4) of them. A mazda wrecker lot (planetmiata.com, partsgroup.com), maybe an rx7 wrecker lot (915racing.com)....


we all know Richard can't spell, punctuate, or form complete sentense/paragraphs, but somehow we deal.

I appreciate the help and all. Thank you.

braineack:
You had time to edit my posts but didnt have time to edit out magnamx-5's insults?

That was nice of you.

jeezus
do you need a tampon for your bleeding 'gina?

Ben: you dont know how to spell too?

The IQ level on this board is something else!!

you confused all of us with your original question.

chill out and take some elbowing, dish it back, laugh and have fun.