teefish1

I need two if they're still available.

WestfieldMX5

Yup they're still available. You can get in touch with me through the contact form here:
Alternator pcb | Frank's Westfield MX5 Alternator pcb |

Frank

WestfieldMX5

I have a couple of these left for $7 shipped!!

stefanst

iTrader: (1)

I'll take one. Please pm me where to send the money :-)

WestfieldMX5

New batch arrived this week. There's an output for a low battery light as well now. The old boards are all gone.

Schuyler

iTrader: (1)

Fancy. Have an old board. Works great. Strongly recommend. Ended up putting mine between the Xpansion board and the main board. Mounted upside down.

323driver

Interested in a couple of boards, Please PM me the details about ordering. Thx

ReallyRottenTurbo

iTrader: (1)

ok maybe I’m lost but our NB with the Rev built Ms2 + is controlling the alt at 14 volts but the alt controller is freaking out due to electrical noise and shutting down the alt... Will this fix it? because I need to get this car on the road Rev was supposed to get me photos of his circuit board so we could modify ours to put a resister inline to the alt control to lower the noise... my wife wants this car on the road ASAP… and I know revs a busy guy.

stefanst

iTrader: (1)

I have an assembled and working Frank's board if you're interested. PM me.

WestfieldMX5

Tara, Stefan's board will work just fine on your car.

Pic of the new version

ericsbestshot

iTrader: (2)

I bought this alternator circuit board with all the pieces include for my DIYPNP. I assembled the board and then got to the part about adding the 47k resistor or jumper. I do not know which one to use because it looks like the variable resistor that was included in the packaging is a 10k resistor. The resistor says on it T93YA 10k 10%.

Any help would be appreciated.

WestfieldMX5

Point is to have a total resistance of at least 47K.
So if the variable resistor is really 10K (do measure it with a multi meter) install the 47K resistor as well. You'll have a total resistance of 47K to 57K
If it is 100K, install a jumper and make sure to adjust the variable resistor to 50K.

medinars

Hi all,

Are these boards still available?

I'm currently in the process of assembling a MS2 for my '00 1.8 miata and would really like to control the alternator this way.

Thanks

bahurd

iTrader: (8)

I have a spare board and I think components unassembled. If you're interested and Frank doesn't have any.

Savington

iTrader: (31)

I have several of these that I purchased and didn't end up using. Let me make sure Frank doesn't have any before I release them to the public.

medinars

Thanks guys, I would really appreciate that.

I was planning to use Frank's board for some time now, but when I finally went looking for his web page in order to buy it, I couldn't find it anymore.

bahurd

iTrader: (8)

Alternator pcb | Frank's Westfield MX5 Alternator pcb |

medinars

Well, I had already tried this link, but it doesn't seem to work. Is it just me?

Braineack

iTrader: (62)

do you live outside the US?

medinars

Yes, I'm in Portugal.

But I must say, altough right now I cannot open the link, about a month ago, if I'm not mistaken, it worked just fine.