LC-1 Switchpoint
 

I think using my math skills I've worked out the default switchpoint of the LC-1 to be 1.45v on the brown/analogue 2 wire. Is this correct? Might be worh putting it in the PnP manual in section 4 where you go in to Megatune and alter the EGO settings in the fitting a wideband section.

2.35V is the number in question.

Jim

Just worked it all out again, using excel and formulars and got 2.44, much closer :)

I use the linear 0=5 5=10, so it comes out to 2.5.