Lc-1 w/ dx16 and TunerStudio setting a wideband
Hi guys im installing a wideband on my car w/ megasquirt its a LC-1 w/ dx16 guage and i was wondering how should i set up my wideband settings? do i use the innovate program or the Tunerstudio? or Both? Thanks
|
TS settings, should be in project properties, set to LC-1 gauge set to give of 0.5-1.5v lambda. Don't forget to calibrate the wideband in fresh air!
|
Originally Posted by Forrest95M
(Post 1321415)
TS settings, should be in project properties, set to LC-1 gauge set to give of 0.5-1.5v lambda. Don't forget to calibrate the wideband in fresh air!
|
I usually do to tune in my ASE and early WUE to give me as close to the 14.7 as i possibly can.Once you have that tuned I don't think it matters as long as the car is at idle
|
another thingy my rpm seems to be alittle bit high, I have the registered version for tunerstudio so im able to use the "auto tune" feature. should I turn the idle screw to get my 850-900rpm range idle? and let autotune fix the afr?
|
no, tune idle control.
|
Originally Posted by Braineack
(Post 1321552)
no, tune idle control.
|
All times are GMT -4. The time now is 03:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands