Cross

iTrader: (4)

Alright this one should be rather easy and I have to be overlooking it... where the heck is the control settings for when the fans come on because my fans are not coming on.

I know one is controlled by the AC but I got to 220 and nothing.

I have disconnected my IAC for now because I can not get it to work correctly.(I idle at almost 4k with it connected and have pulled my hair out trying to figure it out, theirs another 4 page thread on it)

I am getting ready to order a Godspeed Radiator with fans so I will set that up to run both fans when set to come on but I need to know what I am over looking in Tuner Studio that controls this because what I am changing is not doing a damn thing....

Thanks!

Oh and a AbeFM unit, MS2 and a 2000 Miata not boosted.

gooflophaze

extended > output port settings

depends on what output you have set up to drive the fan relay. in my case, i have a rule set up for IAC1, power on output 0, trigger value 1.

output channel "coolant" > threshold 180 hysterisis 10
and
rpm > 600

Cross

iTrader: (4)

Thanks just what I was looking for, that might be where my idle issue was too looking at the settings in there holy HELL!

Now to figure out which one controls my fans.