question with injectors
#1
question with injectors
installed 460 injectors this morning, set megasquirt and car cranked no problem but ran rough
however i can remove two of the plugs and and there is no change in engine speed but if i remove other and engine dies.
im guessing now that they are not working correctly. is there a way to test it when off the car to make sure it is working correctly before i go get new ones?
however i can remove two of the plugs and and there is no change in engine speed but if i remove other and engine dies.
im guessing now that they are not working correctly. is there a way to test it when off the car to make sure it is working correctly before i go get new ones?
#2
switch your coil connectors around so that the known good coil is hooked up to the known working coil output. If it starts producing spark and it's running on those cylinders you know you have a deal coil and not a messed up harness.
Or you might have a dead injector and that cylinder isn't getting any fuel.
Or you might have a dead injector and that cylinder isn't getting any fuel.
#4
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
If they came back all fine you've eliminated a potential problem, and know what they *reall* flow. i.e. mine are 550's according to the injector manual, but in reality they flow 600cc.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM