Stuck on Highway!!! Help!
11-17-2008, 01:42 AM
#1
Elite Member
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
Stuck on Highway!!! Help!
Which two holes do I BOOT jump???!!!
I was driving and bam, It died. Now I tried to reinstall my firmware, and It won't let me. I have been looking at the manuals and nothing is coming up.
ANYONE HAVE A PICTURE?
I was driving and bam, It died. Now I tried to reinstall my firmware, and It won't let me. I have been looking at the manuals and nothing is coming up.
ANYONE HAVE A PICTURE?
Reply
0
0
11-17-2008, 04:02 AM
#4
Elite Member
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Dang. FWIW I searched for nearly an hour in an attempt to find the boot jumper.
IIRC MSPNP uses 3.57SMD Board, and I can't find ANY info/pictures on it. Isn't that a board DIY designed and built?
My absolute best guess would be the jumper just to the left of the processor in this photo:
Seems logical, thats about the location of it on my MS2.2 and IIRC the 3.0 also. Good luck! :(
IIRC MSPNP uses 3.57SMD Board, and I can't find ANY info/pictures on it. Isn't that a board DIY designed and built?
My absolute best guess would be the jumper just to the left of the processor in this photo:
Seems logical, thats about the location of it on my MS2.2 and IIRC the 3.0 also. Good luck! :(
Reply
0
0
11-17-2008, 09:05 AM
#5
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
rofl. i went to megamanual.com, clicked 3.57 SMD Main Board, and saw the picture of the SMD with the boot jumper clearly labeled in under 5 seconds.
yes, it's the jumper to the left of the CPU, labeled: boot.
yes, it's the jumper to the left of the CPU, labeled: boot.
Reply
0
0
11-17-2008, 12:45 PM
#7
Elite Member
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
* *MegaSquirt - Electronic Fuel Injection Computer by Bowling & Grippo * *
Thats the only site I visited. Search google for Megasquirt 3.57, both pages and images and came up with nothing.
Reply
0
0
11-17-2008, 01:02 PM
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,026
Total Cats: 6,592
* *MegaSquirt - Electronic Fuel Injection Computer by Bowling & Grippo * *
Thats the only site I visited. Search google for Megasquirt 3.57, both pages and images and came up with nothing.
Thats the only site I visited. Search google for Megasquirt 3.57, both pages and images and came up with nothing.
"This site contains an archive of the early versions (circa. 2003) of the hardware and software documentation for MegaSquirtŽ EFI Controllers.
It remains here primarily for reference for older board versions and code (and to prevent dead links)."
Yup... It remains here primarily for reference for older board versions and code (and to prevent dead links)."
Reply
0
0
11-17-2008, 03:45 PM
#9
Elite Member
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
Hmmm. Page clearly states:
"This site contains an archive of the early versions (circa. 2003) of the hardware and software documentation for MegaSquirtŽ EFI Controllers.
It remains here primarily for reference for older board versions and code (and to prevent dead links)."
Yup... It remains here primarily for reference for older board versions and code (and to prevent dead links)."
I tried, at least. Correctly identified the boot jumper too
Reply
0
0
11-18-2008, 08:47 AM
#10
Elite Member
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Location: Dallas
Posts: 1,829
Total Cats: 0
We finally found it at 1:30 after I posted.
Whole story!:
My little brother and a buddy came down. I took them to the drag strip. They where headed home and his car died while driving down the freeway. I go to check their car out. And when I reach the exit my car dies while driving down the freeway. I get out, and they are directly across the highway from me waving..............LOL
Well, I had hit a huge bump in the freeway and my computer cable poped off and the computer died ( has no battery) but the car still had power and died simutaniously, . So I reloaded the map no good. Reloaded firmware. Now the car is still just strating and dieing. New plugs, same thing.
Know I grab the spare fuel pump. It starts and runs. I'm heading home, the tach is bouncing, and it is spudering. And bam it runs great. I get to the exit of my brothers, It dies. I roll off the road, and as I am stopping there is another truck dieing and stopping on the side of the highway.
I guess my car is simpathetic of other cars.
I grounded the plug to the head and their was spark, grounded it again, no spark. I think it is the CPS (CAS).
I'm going to swap the igniter first from another car. And if it is the cas. i'm putting a brand new one on it.
Those things gout out without notice, and they act like a hundred different things.
Autozone $330, Orielly's $478. And there is no rebuild kit.
If you know of a rebuild kit, or a cheaper place, please let me know!
Whole story!:
My little brother and a buddy came down. I took them to the drag strip. They where headed home and his car died while driving down the freeway. I go to check their car out. And when I reach the exit my car dies while driving down the freeway. I get out, and they are directly across the highway from me waving..............LOL
Well, I had hit a huge bump in the freeway and my computer cable poped off and the computer died ( has no battery) but the car still had power and died simutaniously, . So I reloaded the map no good. Reloaded firmware. Now the car is still just strating and dieing. New plugs, same thing.
Know I grab the spare fuel pump. It starts and runs. I'm heading home, the tach is bouncing, and it is spudering. And bam it runs great. I get to the exit of my brothers, It dies. I roll off the road, and as I am stopping there is another truck dieing and stopping on the side of the highway.
I guess my car is simpathetic of other cars.
I grounded the plug to the head and their was spark, grounded it again, no spark. I think it is the CPS (CAS).
I'm going to swap the igniter first from another car. And if it is the cas. i'm putting a brand new one on it.
Those things gout out without notice, and they act like a hundred different things.
Autozone $330, Orielly's $478. And there is no rebuild kit.
If you know of a rebuild kit, or a cheaper place, please let me know!
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM
Hot_Wheels
Local Meets, Events and Tech Days
2
09-24-2015 02:43 PM
