Stuttering between 3k and 4k rpm
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Location: whats that coming over the hill?
Posts: 67
Total Cats: -15
Stuttering between 3k and 4k rpm
hi everyone.
ive got a mspnp gen 1 on my 1989 eunos roadster which is now turbocharged.
the car is mapped at 205hp at 10psi and its great when im in boost.
so heres my problem, the car seems to run lean (around 17-18afr) at partial throttle when the engine is between 3000 and 4000rpm.
Ive changed the cas sensor at the rear, i have ngk bkr7e rate plugs gapped to 1.1mm and installed toyota cops.
but the problem is still there.
i have a innovate MTX-L wideband hooked up correctly. just bought a new set of ngk plugs thinking it could fix this.
Its had this problem before it was mapped therefore for a while i was thinking the map needs tweeking i told the company that it tends to misfire and he told me that he thinks it could be the pressure regulator being faulty as its not designed to have boost pushed into it.
has anyone got any clue whats wrong with the car?
im not that good with laptops and software, i tend to leave it to the professionals
ive got a mspnp gen 1 on my 1989 eunos roadster which is now turbocharged.
the car is mapped at 205hp at 10psi and its great when im in boost.
so heres my problem, the car seems to run lean (around 17-18afr) at partial throttle when the engine is between 3000 and 4000rpm.
Ive changed the cas sensor at the rear, i have ngk bkr7e rate plugs gapped to 1.1mm and installed toyota cops.
but the problem is still there.
i have a innovate MTX-L wideband hooked up correctly. just bought a new set of ngk plugs thinking it could fix this.
Its had this problem before it was mapped therefore for a while i was thinking the map needs tweeking i told the company that it tends to misfire and he told me that he thinks it could be the pressure regulator being faulty as its not designed to have boost pushed into it.
has anyone got any clue whats wrong with the car?
im not that good with laptops and software, i tend to leave it to the professionals
#4
Junior Member
Thread Starter
Join Date: Sep 2014
Location: whats that coming over the hill?
Posts: 67
Total Cats: -15
once it goes past 4k its fine. ive just found out if i just rev the car and hold it between 3-4k it will run lumpy.
The guy thats mapped it has done many mx5's, evo's, subarus and even the new r35 GTRs
hes mapped my mates 580hp celica and that is perfect, he seemed to know his stuff when he was mapping it too.
the VE table looks normal pretty smooth
The guy thats mapped it has done many mx5's, evo's, subarus and even the new r35 GTRs
hes mapped my mates 580hp celica and that is perfect, he seemed to know his stuff when he was mapping it too.
the VE table looks normal pretty smooth
#6
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,493
Total Cats: 4,080
the car seems to run lean (around 17-18afr) at partial throttle when the engine is between 3000 and 4000rpm.
#8
Junior Member
Thread Starter
Join Date: Sep 2014
Location: whats that coming over the hill?
Posts: 67
Total Cats: -15
i did use autotune before but it just made the a/f ratios all over the place! hmmmm ill give it a go but im definately gonna create a backup file incase i mess things up!
im just thinking if the car would be running lean maybe the fuel pressure reg has gone faulty after pushing boost into it?
im just thinking if the car would be running lean maybe the fuel pressure reg has gone faulty after pushing boost into it?
Thread
Thread Starter
Forum
Replies
Last Post
touge4life
Engine Performance
5
07-01-2010 11:38 AM