cardriverx

iTrader: (12)

holy crap makeing the harness sucks. Does anyone have pictures on how to shove the spades into the connectors?

Joe Perez

iTrader: (8)

Little more info, perhaps?

So that we're all on the same page, these are fork/spade terminals:



Is that what you're referring to? What exactly are you trying to shove into what? (no profane answers, children. We're all thinking it.)

bryantaylor

iTrader: (5)

take it out to diner, give it a ton of booze, say its pretty and it will slide right in

Ben

iTrader: (33)

it puts the spade in the connector
else it gets the hose again

Arkmage

iTrader: (3)

are you kidding? even a two year old can put a peg in the appropriately sizes/shaped hole.

mazda/nissan

iTrader: (2)

are you talking about the female connectors fitting over the prongs inside the clip? if so loosen up the connectors with some needle-nose pliers

bryantaylor

iTrader: (5)

dont forget to cuss alot

cardriverx

iTrader: (12)

ive been usin that and alot of brute force.. seems to work deicent so far.

cjernigan

iTrader: (13)

What connectors are you talking about?

cardriverx

iTrader: (12)

for ze MS boomslang harness.

Braineack

iTrader: (62)

they only fit in one direction. you must make sure the crimped end the holds the insulation down isn't too large. they click when they are in place.