MegaSquirt Mounting
 

So basically my freshly built MegaSquirt is sitting on the passenger side floor in all its glory.

What are some creative ways you guys have mounted them in an NA? I a few ideas but mostly thinking of fabricating up a bracket to utilize stock mounting points.

If anyone has pictures of their mounting that would greatly be appreciated.

I'll probably mount it under the glove compartiment so I can see the LEDs on the front:jerkit:

http://www.boostedmiata.com/MS/IMG_3369.JPG

this is how i previously did it. newest installation consists of it sitting next to the oem ecu, with a usb cable port in the center console to plug into it.

how does that mount at the back? zipties around the black plastic pipe?

yep. they're a bunch of brackets and supports to warp around.


I'll have to show you guys my usb port...used a panel mount cable
http://www.datapro.net/images/1598.jpg

thats cool Scott

yup i mounted my pnp MS where the stock ecu was and ran the cable up to the centre console it reached with just the serial port to the passenger seat but i have the usb adapter so its extended so its very easy access.

Here are some images of my setup in the '92, which mounts the MS in the stock location. Done thusly, the stock ECU coverplate still fits in place.

http://media3.dropshots.com/photos/7...7/b_103515.jpg



http://media4.dropshots.com/photos/7...7/b_103519.jpg



http://media4.dropshots.com/photos/7...7/b_103513.jpg

For now.

I loved my bungee cord set up. But it won't fit on his car, I checked. And damn Joe giving me the idea to remove my AC box, now I have nothing to mount to. It's one screw and a rubber band now, and I don't like it cause... cause you need a screwdriver to get it out. Plus before it was rubber mounted and vibration safe.

I'm just going to have to make a bracket.
-Abe.