Miata Plug n' Play question?
Ok my question is do the miata plug and play (1990-1993 USDM Mazda Miata w/ manual tranny, MegaSquirtPNP Model #MM9093) work on a JDM Mazda BP Turbo engine out of the Mazda familia/323 Gtx or gtr and there wiring loom?
thanks guys |
Only if you put a Miata ignition on it and repinned it so that it could run (however badly) on a Miata ECU.
|
re pin it? being both BP engines wont they have the same ECU plug?
and why would it run badly? i have running a CAS with coils |
They have the same plugs, but different pinouts. The JDM BPT that I'm aware of used a distributor, so its ignition pins aren't going to be quite the same. And I would not expect a BPT to run perfectly on a stock Miata ECU (an MSPNP tuned for it would be a different story).
|
yeah im not planing on running a stock ecu lol otherwise id stick with my bp26 ecu.and correct with the distributor but i have changed that to a CAS and coils as i said before. so would i still have to re pin it to run on the latests megasquirt PNP ecu?
anyone here that knows what there talking about?:giggle: |
That would mean you've changed the pins at the connector... unless your second coil isn't connected to anything?
|
BPT-UTE, you might want to consider building a DIYPNP kit, as you could wire up the DIYPNP's connector board to the GTX's pinout.
|
nah bugger it ill just go g4 link ecu. cant be fucked with a diy kit and its still only a megasquirt
|
All times are GMT -4. The time now is 07:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands