Microsquirt help.
4 Attachment(s)
I posted on the Microsquirt forums, but I know there are some smart cookies here!
So, I bought this: http://www.diyautotune.com/catalog/m...ess-p-131.html I'm trying to run my 4g63 with a 24-1 cam wheel in the stock housing. I wired it all up and what not, but it does the same thing that my MS3 was doing. It seems to be firing the timing regular, and 180* off. That can be seen here: I tried switching wire 1 with 4 and 2 with 3, and it runs the same. (wasted spark) I tried switching bank 1 (1+4) wires with bank 2 (2+3) also, that did not run at all. This is making my exhaust header glow very bright. (not good for my parts) I also noticed that it seems to have a "mechanical" advance to it; as the rpms go up, the timing advances. I can take a video of that if anyone wants to see that. I'm about at my wits end. I've attached a log and my msq. |
All times are GMT -4. The time now is 10:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands