It sounds like you need an aftermarket misfire system.

Yeah I did clean up the board decently. Didnt scrub very much but it looked clean. I'll do it again to be safe while I have it out to look everything over.

and uh, aftermarket misfire system :confused:

^ https://www.miataturbo.net/showthrea...market+misfire

Dont quite see how a misfire system would cure my misfire problem

It was a joke. You'll catch on, just let it marinate.

mmmmm.... marinate

Schematics are in the Megamanual so you can check out any specific circuit--

V3 Board Schematics Online

Or here's a pdf download, easier to search for signal tags to follow them around: http://www.diyautotune.com/downloads...Schematics.pdf


You're probably pulling spark from the LED's like most all of us right? You'd want to look at those circuits... There's not much to them.

I'm honestly not real optimistic that this is where your problem lies, but it's certainly a possibility and worth looking into...

I checked the board over and I found a lot of flux between all the LEDs. Chipped it all off easily. I must have gone back and resoldered them after cleaning or something. I really hope that was it as I cant find anything else wrong.

Ok Ben you win, I'll try swappin the ignitor.