Missing Parts
 

Previous owner was stand alone. I'm switching it to parallel.

Can I still run parallel with these parts missing? I can't find a replacement at the Radio Shack. Anything I can use to substitute?

Or someone that's stand alone...sell them to me!

Missing:
R39 - Resistor 1.0 Ohm ½W 5% Carbon Film (1.0H-ND)
D8 - Diode Zener 22V 1W 5% DO-41 (1N4748ADICT-ND)

Thanks.

you dont need them. if you really want them ill send you them both.

for the standalone Idle mod, r39 is jumped and d8 is removed....since you'll be using the stock ecu to control idle, it doesn't really matter. I'm sure Joe will further elaborate ;)

Elaboration:

To use the MS to control the stock PWM idle valve, one must perform the mod in the purple box under step 62 in the assembly instructions here: http://www.megamanual.com/ms2/V3assemble.htm

Since you are going parallel, you won't be using this circuit at all, so don't mind it.

Thanks for the info guys. Looks like I'll be on my way to squirtin' soon.