New .Inc for Wideband
08-10-2008, 05:57 PM
#1
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
New .Inc for Wideband
Hi,
My TechEdge DIY Wideband is reading .20 volts higher (I know this from my dash display which I know is reading correct) than it should be and therefore causing my MegaTune Dash board gauge to be off. I've already modified the .inc file for MegaLogView and have it showing my correct numbers.
I also manually modified the WBlambda100MOT.inc file to reflect the right numbers, but the display is still showing the same incorrect numbers. Do I have to do anything special to get MegaTune to ready the new .inc file I have created for my TechEdge DIY wideband?
My TechEdge DIY Wideband is reading .20 volts higher (I know this from my dash display which I know is reading correct) than it should be and therefore causing my MegaTune Dash board gauge to be off. I've already modified the .inc file for MegaLogView and have it showing my correct numbers.
I also manually modified the WBlambda100MOT.inc file to reflect the right numbers, but the display is still showing the same incorrect numbers. Do I have to do anything special to get MegaTune to ready the new .inc file I have created for my TechEdge DIY wideband?
Reply
0
0
08-10-2008, 07:38 PM
#2
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
there's an inc. file for MLV?
For Megatune, maybe the lambaSensors.ini file in C:\Program Files\MegaSquirt\MegaTune2.25\
; Another way of doing it for the Tech Edge linear output:
; afr = { 9.0 + 0.039216 * egoADC } ; WBLIN, Mot ADC
; afr = { 9.0 + 0.039063 * egoADC } ; WBLIN, AVR ADC
For Megatune, maybe the lambaSensors.ini file in C:\Program Files\MegaSquirt\MegaTune2.25\
; Another way of doing it for the Tech Edge linear output:
; afr = { 9.0 + 0.039216 * egoADC } ; WBLIN, Mot ADC
; afr = { 9.0 + 0.039063 * egoADC } ; WBLIN, AVR ADC
Reply
0
0
08-10-2008, 07:52 PM
#3
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
there's an inc. file for MLV?
For Megatune, maybe the lambaSensors.ini file in C:\Program Files\MegaSquirt\MegaTune2.25\
; Another way of doing it for the Tech Edge linear output:
; afr = { 9.0 + 0.039216 * egoADC } ; WBLIN, Mot ADC
; afr = { 9.0 + 0.039063 * egoADC } ; WBLIN, AVR ADC
For Megatune, maybe the lambaSensors.ini file in C:\Program Files\MegaSquirt\MegaTune2.25\
; Another way of doing it for the Tech Edge linear output:
; afr = { 9.0 + 0.039216 * egoADC } ; WBLIN, Mot ADC
; afr = { 9.0 + 0.039063 * egoADC } ; WBLIN, AVR ADC
I've got the NON-Linear DIY Techedge and it is causing my grief as the above won't work.
Reply
0
0
08-10-2008, 08:28 PM
#5
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
Yeah.. Now how do I get MegaTune to read the friggen .inc file for my Techedge. Everything is good except this and it is just annoying and not really hurting my tuning as I have the voltages fixed in MLV and the AFR Target tables.
Reply
0
0
08-10-2008, 09:25 PM
#6
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
What about this file in your \megatune2.25 directory? Although that looks like it's just for lamba values.
WBlambda100MOT.inc
there is also a copy in your MegaTune2.25\mtCfg directory.
just reread your first post and see you already edited that file. did you get both copies? maybe try throwing a copy in your car/mtcfg directory
WBlambda100MOT.inc
there is also a copy in your MegaTune2.25\mtCfg directory.
just reread your first post and see you already edited that file. did you get both copies? maybe try throwing a copy in your car/mtcfg directory
Reply
0
0
08-10-2008, 09:26 PM
#7
Elite Member
iTrader: (21)
Join Date: Jun 2006
Location: Point Pleasant, NJ
Posts: 2,957
Total Cats: 2
try posting over at http://www.msefi.com/index.php in the megatune forum http://www.msefi.com/viewforum.php?f=24
Reply
0
0
08-10-2008, 11:00 PM
#8
Guest
Thread Starter
iTrader: (6)
Join Date: Sep 2007
Location: Vaughan, On, Canada
Posts: 1,085
Total Cats: 1
What about this file in your \megatune2.25 directory? Although that looks like it's just for lamba values.
WBlambda100MOT.inc
there is also a copy in your MegaTune2.25\mtCfg directory.
just reread your first post and see you already edited that file. did you get both copies? maybe try throwing a copy in your car/mtcfg directory
WBlambda100MOT.inc
there is also a copy in your MegaTune2.25\mtCfg directory.
just reread your first post and see you already edited that file. did you get both copies? maybe try throwing a copy in your car/mtcfg directory
EDIT: NOPE!!!
Last edited by M-Tuned; 08-10-2008 at 11:38 PM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Mikel
MEGAsquirt
4
09-28-2015 04:46 PM
