MS 1.8L BEGI S3 map request
Hey guys, I tried to post here: https://www.miataturbo.net/forum/showthread.php?t=3077 but it wouldn't let me. I dunno if I'm too much of a noob or if someone's banstick needs to be recharged or what.
I was hoping one of you kind soles could supply me with a map, or point me toward a download somewhere, so I could at least get the car on the road for some additional tuning. Setup is a BEGI S3 w/ GT2560 on a '96 motor and 550 injectors. I'm planning to run 12 pounds but anything I can use as a jumping off point would be excellent. If anyone can help me out I will be eternally grateful. :bowdown: |
The MSPNP base map is as good of a place to start as any.
|
The only maps from MS that I've been able to find are NA maps. Either I'm looking the wrong place, or I'm just completely missing the concept. Running a NA map on a car running 12psi just doesn't seem like a good starting point to me. Won't I be slinging pistons and rods all over the road WAYYY before I get it anywhere close to dialed in?
Sorry for my ignorance, this will be my first attempt at tuning a standalone. I've tweeked on piggybacks before, but they always had some sort of decent tune before I started. |
DIY's MS base maps are scaled for boost. Don't know what you're looking at.
|
1 Attachment(s)
While I don't agree with starting with someone else's maps over what DIY provides I'll post mine anyway.
standalone MSI in a 94 with gt2560r on a 99 motor with 550s. Don't just run my MSQ because I run COPs so your dwell times will be off. USE AT YOUR OWN RISK!!! |
Thanks for posting the map, I'll go through it and see if I can pick apart the variances from the MS base map before I run anything. I appreciate the help and I'll be careful :)
|
All times are GMT -4. The time now is 05:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands