wittyworks

iTrader: (6)

I realized today why my ve anazlyze wouldn't work correctly, my MAP is way off, about 40 under what it should be. At see level its 60, when it should be 100. I got this picture when i reopened tunerstudio, could the 29y3 be the problem, and how do i update it to 29y4? Or will this not fix it, and my map sensor is messed up?



Thanks,
Evan

Braineack

iTrader: (62)

your firmware is corrupt.

wittyworks

iTrader: (6)

Okay so I need to reload my firmware which I can downlOad from diyautotune? Could vista be causing problems?

yunvmyegt

iTrader: (3)

vista doesnt play well with ms....

wittyworks

iTrader: (6)

Okay, so i reloaded the firmware that i just downloaded of of the diyautotune site, and that didn't change anything. I also tried hooking up my brothers laptop that i originally used, and in megatune it read 96 kPA, but that computer in tunerstudio read 64 kPA. I just reinstalled tunerstudio, and that changed nothing.

Should i try to download the firmware again to the mspnp? any other ideas? On the vista machine, both megatune and tunerstudio read 64 kPA. Do i have to set it as the correct map sensor in tunerstudio?

Thanks,
Evan

wittyworks

iTrader: (6)

I think i might need to set the map sensor to the 4 bar sensor, ill try it when i get home from class.

wittyworks

iTrader: (6)

Okay i got it all working now just changed it to the correct map sensor, 400 kpa that comes in the 94-95 psi.
I think that the other problem with firmware and stuff is just a problem with vista.

On another note, can i just flash the hi-res firmware and have the better injector accuracy (three decimal places), without anything besides changing ve table? I think from my research everything will work because it's a newer mspnp version.

Thanks