MS-1 upgrade?
 

Can my MS-1 3.0 which is running parallel on my 99 with a CAS be converted into an MS-II that runs ALL the stock sensors, (including crank trigger)? If yes, than who wants to do this for me, and what will it cost me? PM if desired. Obviously the parallel harness needs to be modded. I also want to use my CAS wires that are running through the firewall(once CAS is removed), for EBC. So the task is this:
Convert MS-1 to MS-2, setup for EBC, setup for launch control, modify PNP parallel harness, make new MS work with ALL stock 99 sensors and still be run parallel.