How are you guys holding your IAT sensor wires onto your MAF/AFM?
#1
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
How are you guys holding your IAT sensor wires onto your MAF/AFM?
High temp electric tape, soldered into place?
Mine tend to fall out quite often and im looking for a more permanent solution. Something that can be easily reverse able and stand up to the high temps under the hood.
Lets hear what you guys have done.
Mine tend to fall out quite often and im looking for a more permanent solution. Something that can be easily reverse able and stand up to the high temps under the hood.
Lets hear what you guys have done.
#5
I've just about run out of existing holes to fit things through the firewall. Someday once I have a trusting relationship with the MS i'm likely going to do a complete re-wire on the engine harness and tidy things up.
#6
Elite Member
Thread Starter
iTrader: (15)
Join Date: Sep 2007
Location: Incline Village, NV
Posts: 2,034
Total Cats: 5
I would like it to be reversible, so hacking up the harness isnt really an option for me. Im thinking, possibly find a used/broken afm and use the male end that plugs into the harness and just solder the wires to that, and have it plug right in.
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,017
Total Cats: 6,587
But your idea about the spare AFM connector will work too. That's how I got F/P IAT working back when I had an EMU, after removing the AFM. Specifically:
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM