Ms 3.57
 

Got one of these bad boys for my bday and was wondering if there was a howto on the ignition mods....all the ones i can find are either for the 3.0 or 2.2

Buy me one and I'll figure it out for you.

lol...i couldnt wait so i stopped being lazy and im figuring it out now.:)

If all works out and there isnt a howto already i'l make one after.

same thing for the most part but you'll be soldering to pads and not holes.
Why the 3.57 board when you could have gotten the 3.0 for less money.

Got it as a bday present so i wasnt gonna argue


and modding this one is way easier.....about half of it is done already.

Here's my quick and crappy diagram...

http://i6.photobucket.com/albums/y24...357_silk-1.gif

Cool, but where are the real photos?

hm, maybe you should have done it on the back side?

you cant, the whole point of the board is that it uses surface mounted components.

There are still holes going through where you needed to run the wires.

who cares as long as it works?!

needs bigger wire

Def needs some 12 gauge :rolleyes:

bah...its from the same spool i used for my old escort's ms...no problems with that one.


And you could go from underneath but i really dont care what it looks like as long as it works.