MS random resets with boost solenoid connected
2 Attachment(s)
Hi
I'm struggling to connect a DIY PNP2 Megasquirt to boost control MS works fine but if i connect the boost solenoid to 12v i start to have random resets as you can see on the video i made in the log i have this https://www.miataturbo.net/attachmen...ine=1465167952 and the result on the dashbord is this https://drive.google.com/open?id=0B3...GdjWDFYb0pzMkE Any thoughts? |
Please post the actual data log.
|
2 Attachment(s)
Originally Posted by Matt Cramer
(Post 1336729)
Please post the actual data log.
|
I see a problem with the RPM sync, but no processor resets. Can you post your MSQ and a composite log? The composite log will give more info about what's wrong with the RPM signal.
|
4 Attachment(s)
Originally Posted by Matt Cramer
(Post 1336948)
I see a problem with the RPM sync, but no processor resets. Can you post your MSQ and a composite log? The composite log will give more info about what's wrong with the RPM signal.
Tanks for the help. Not sure if this is what you want but were it goes... |
Originally Posted by Matt Cramer
(Post 1336948)
I see a problem with the RPM sync, but no processor resets. Can you post your MSQ and a composite log? The composite log will give more info about what's wrong with the RPM signal.
|
Not seeing any loss of sync indicators in the composite log. Was the problem happening when the log was taken?
|
All times are GMT -4. The time now is 12:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands