deezums

iTrader: (3)

So, I'm not entirely sure gslender is relevant or not any more. It seems 3.3.2 has the ac idle up code and "adaptive" idle advance driven off cl pid. I don't see a way to switch tables with ac, though, the one feature I think may be missing.

However, I don't get a conflict if I try to set both table switching and ac idle up on PE1. I'm thinking it will work, but thought I'd ask before I break stuff. Not that I ever use ac, especially in this part of the year...

Besides these features, is there anything else I missed in searching?

Braineack

iTrader: (62)

you'd have to split the a/c switch into pe1 and something else.

why you'd need tableswitching maps to trigger against the a/c is beyond me. what works better is tuning.

deezums

iTrader: (3)

I use W or ALED to run the AC clutch, works pretty good as is already.

I think it was you talking about running more timing down low with AC on, which is what I was going towards, although I probably don't really need it. Besides the idle dropping on it's face immediately after switching AC off, it works fine, doesn't stall. I was thinking more idle timing might equal less IAC duty, which might make the drop less intense?

Breaking things to break them...