MS1 // to MS3 - What to do about harness?
So when I upgrade my MS, does it make sense to mod my parallel harness to be a standalone for the MS3, or should I just get a new one? Any market for parallel harnesses?
What I'm after is the least amount of work. Convert or replace? |
unplug the stock computer, add the idle out wire, and volia you have a standalone harness.
|
You're kidding. That's all there is to it? I'm going to have to move crap around though, right? I think I'm going to forgo the expander for now in the interest of getting started on this for less cash.
|
Why would you need to move things around? On the db37(s) side, sure a few wires here and there if you add the expander, but why would the part plugs into the oem harness need to change?
|
OK, makes sense. This might be easier than I thought! Thanks, Scott
|
when I first went MS3, from MS2, I simply swapped the case and CPU, loaded the same tune and it started right up and off I went. The biggest change will be adding in all the extra features the the MS3 offers...such as a./c idle up, the idle duty tables, the 4x4 idle ve table, etc. etc.
|
Well, I'm coming from MS1. I imagine I get to re-tune. This is fine though since I wasn't happy with my tune anyhow.
|
All times are GMT -4. The time now is 08:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands