MS2 Extra - inputs input wanted / EGT?
Hi,
with my engine rebuild I got a EGT sensor installed into the exhaust manifold. Now I want to log the EGTs with Megatune/MLV. At the moment it looks like I am out of useable inputs. This is what my pinout looks like: http://www.ingenieure-reichel.de/upl...nout_mx-25.jpg (yellow is how I used my in-/outputs) Would you - use JS4 and leave the barometric correction alone (which is switched of anyway, due to the bad experiences here with the baro correction)? Do I need other inputs than that - did I miss something? I guess the EGT circuit as shown at the MS1 Extra manuals should work also with the MS2 Extra? Thanks, Greets |
Yup. Gotta use either JS4 or JS5, meaning you can give up either knock or constant baro.
|
I want to keep knock - just got myself a KnocksenseMS (as long as there is nothing more precise on the market)
So baro has to go... Thanks! |
Originally Posted by Zaphod
(Post 417762)
(as long as there is nothing more precise on the market)
J&S Electronics • SafeGuard No first-hand experience with either of the above, but I can tell you from experience that the KSMS leaves something to be desired in terms of sensitivity vs. false indication. |
There is one other option, but it's going to take a lot of homebrew hardware right now - if you have a second chip with ADC converters, you can get it to talk to the MS over the CANBus and bring in up to 8 extra analog inputs.
|
@Matt - as I just need 1 more input (or really jsut have to remove the baro correction) I will not need 8 more inputs. But thanks.
@Joe, I am waiting for the "Knock Detection with variable sensitivity over RPM" which is in development for quite a while now at msextra.com in the section Expansion boards. It should even be possible to use the OEM Miata NB knock sensor. For now the KnocksenseMS has to do... |
All times are GMT -4. The time now is 03:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands