MS2 Flooding Engine on cold start
Car has been running fine on ms2 for 2 years, except for about 2 weeks ago. The problem only happens when the ambient temperature is over 80 degrees and only first start after being parked for a few hours. If the temperature is below 80 starts and runs fine. It actually will flood the engine to the point where it locks up during cranking. Once i get the engine running and cleared out it will start and run fine. I shut off the injector priming pulsewidth above 70 degrees coolant temp and removed tons of fuel out of the cranking settings and still had the problem today. I'm stumped.
|
All times are GMT -4. The time now is 02:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands